Construction légère – poids total de ~49.5g
PixArt PAW3950 U+1F95A
Kailh GXMechanical Switches
Experience ultimate responsiveness and real-time precision with the incredible 8000Hz polling rate of the OP1 8k v2. Powered by the Nuvoton M483 high-speed MCU, this gaming mouse delivers up to 8000 data reports per second, ensuring lightning-fast speeds and minimal delay. With every move flawlessly executed, you'll have the upper hand in the most intense and fast-paced gaming scenarios. With the rising trend of games supporting higher polling rates, coupled with ongoing OS optimizations, you can ensure your gameplay is optimized for maximum responsiveness and precision. For older games without 8000Hz support, effortlessly adjust the polling rate with a simple long press of the mode button at the bottom of the mouse to cycle through the polling rates. Elevate your gaming experience with the unmatched precision and responsiveness of the OP1 8k v2.
Powered by our custom PixArt PAW3950 U+1F95A sensor, the OP1 8k v2 delivers uncompromising precision at up to 30,000 CPI with ultra-fine adjustability in 10 CPI steps below 10,000 and 50 CPI steps above. We’ve locked the sensor’s frame rate at a blazing 20,500fps to ensure stable tracking and ultra-fast responsiveness at all times*. Combined with a maximum of 750 IPS and 50G of acceleration, this sensor doesn’t just keep up – it stays ahead. Fine-tune your lift-off distance with 11 settings in 0.1mm increments, ranging from 0.7mm to 1.7mm, for a perfectly dialed-in feel on any surface. For grip styles where the mouse is not held straight to the direction of movement, the "Sensor Angle Tuning" feature allows the tracking axis to be adjusted from -127 to +127 degrees in 1-degree increments, facilitating swift swipes and opponent tracking. With optional Motion Sync up to 8000Hz, tracking becomes even smoother, at the cost of just one polling event of delay. Ultimate performance meets ultimate customizability.
* requires firmware 1.02 or aboveDesigned for lightning-fast precision at all polling rates, the mechanical Kailh GX switches guarantee you won't miss a crucial click. Their SPDT configuration ensures optimal electrical contact and unmatched reliability. Featuring both top and bottom contacts, Kailh GX Switches excel whether you prefer low click latency in GX Speed Mode or security in GX Safe Mode. What sets them apart is their crisp, defined click sensation, offering tactile feedback for enhanced gaming control. Precise actuation and a balanced design ensure flawless, spam-friendly rapid-fire actions.
The OP1 8k v2 raises the bar for wired mouse performance, boasting click latency averaging below 70 microseconds (equivalent to 0.070ms)*. With a steady 8000Hz polling rate for the clicks, you'll enjoy ultra-low click latency across all sensor polling rate settings. GX Speed Mode further lowers click latency by about 1.4ms – your PC executes clicks faster than you can hear the physical click. This exceptional responsiveness of the Kailh GX switches in combination with the GX Speed Mode guarantees instant registration of every click, empowering you in crucial gaming moments and helping secure those game-winning duels.
* tested with 10,000 clicks on XLAT v.1.4.0With a lightweight build of just below 50g, the OP1 8k v2 gaming mouse offers unparalleled comfort during those intense gaming sessions, allowing you to focus on your own performance. Drawing inspiration from the popular XM shape, the OP1 takes it up a notch while keeping an emphasis on claw grips. Its flatter sides provide ultimate flexibility for finger placement, making it an excellent fit even for gamers with larger hands. The extended side walls prevent accidental clicks, allowing you to rest your fingers on the edge without any interruptions. This subtle yet significant design change offers additional comfort and control, catering to gamers with various hand sizes and grip styles.
Thanks to its Flex Cord 5.0 cable and therefor permanent data connection to the PC, the OP1 8k v2 doesn't need to save power. The lack of power saving features and permanent sensor corded mode mean that the device is always at its peak performance, ready to execute your every move (or click) with unrivalled accuracy, precision and speed. While other mice may experience a slight delay as they ramp up sensor and MCU, ours remains ready for action at all times. The result? Instantaneous response times and pixel-perfect tracking, giving you the competitive edge. Say goodbye to the tiniest delays caused by power-saving measures. Say hello to the ultimate gaming mouse that never sleeps, the Endgame Gear OP1 8k v2.
What makes a mouse click great? Ask this question to 10 people and get 11 different answers. Everyone has their own preferences and sometimes we just want to use what nobody else is using. While the Kailh GX is a switch with a very good combination of short internal travel, crisp actuation point and spammability, you may still want to try your favourite switch. All OP1 mice have a swappable main button switch design with accessible screws at the bottom plate. This allows for effortless customization, giving you the perfect click feel tailored to your liking. Choose from a variety of switch packs offering different click sensations, and follow our simple step-by-step guide to replace the switches. With the universal switch pack, you can use any mechanical switch you can find, solder-free.
Similar to the click feeling preference, how a gaming mouse should glide is a science on its own and arguable also depends on the genre of games you play the most. OP1 comes with our so called Hybrid Skate Design. That means out of the box, we chose a smaller skate set that offers a great balance between surface area, weight and glide properties. Additionally, we add a larger skate set and a sensor skate to the packaging, which is beneficial especially for softer mousepads. If you want to minimize the surface area of your mouse skates, say for use on a glass pad, the large skate grooves of the OP1 give you plenty of possibilities to place your favourite dot skates. The screws in the bottom plate can be accessed to open the mouse and change the main button switches without removing the skates. Thanks to an improved adhesive of the v2 models, removing your skates is now quick and clean, every time.
Couleur | |
Couleur primaire | Noir |
Capteur | |
Type de capteur | optique |
Modèle de capteur | PixArt PAW3950 U+1F95A |
DPI réglable | Oui |
DPI minimum | 10 DPI |
maximum DPI | 30000 DPI |
Note dpi | steps of 10 CPI ≤10000 CPI, 50 CP >10000 CPI; pre-defined: 400, 800 (default), 1600, 3200 |
Retirer la distance (LoT) | 1 mm |
Note de distance de soulèvement | 0.7 - 1.7 mm in increments of 0.1mm via software |
Accélération | 50 G |
Vitesse de suivi maximale | 750 IPS |
Éclairage | |
Éclairage / RGB | Non |
Ergonomie | |
Disposition de la souris | droitier |
Types de préhension pris en charge | Claw Grip |
Spécifications de la souris | |
Remarque | small skates pre-installed, large skates included |
Patins | conception de patins hybride |
Mises à jour du micrologiciel | Oui |
Microcontrôleur | NUVOTON M483 |
Connectivité | |
Fermé / sans fil | filaire |
Type de connexion | USB Typ a |
Câble | Flex Cord noir 5.0 |
Longueur de câble | 180 cm |
Série de produits | |
Série / famille de produits | OP1 8K |
Dimensions | |
Longueur / profondeur | 118.2 mm |
Largeur | 60.5 mm |
Hauteur | 37.2 mm |
Lester | 49.5 g |
Normes / Spécifications | |
Taux de sondage | 8000 Hz, 4000 Hz, 2000 Hz, 1000 Hz |
Note de taux de sondage | 8000 Hz by default |
Matériaux | |
Châssis matériaux | Plastique |
Surface des matériaux | revêtement Dry-Grip |
Matériaux patins | PTFE |
Touches | |
Nombre de boutons / touches | 6 |
Nombre de boutons / touches Note | 2x top, 2x side, 1x mouse wheel, 1x CPI on bottom |
Commutateurs de bouton de souris primaire (droite / gauche) | Interrupteurs Kailh GX sélectionnés |
Commutation de la durée de vie | 80 millions d'activations |
Cliquez sur Détection | Numérique |
Encodeur de roue | Kailh Dustproof |
Défilement des roues de souris | 2 directions |
Interrupteur de bouton de souris intermédiaire | interrupteurs Kailh GM 2.0 sélectionnés (20 millions d'activations) |
Commutateurs de bouton latéraux | interrupteurs Kailh GM 2.0 sélectionnés (20 millions d'activations) |
Please read this End User License Agreement carefully before you complete the installation process and before you use the ENDGAME GEAR Configuration software for the first time. By using this software (including the installation process), you declare your consent with the terms and conditions of this Agreement. If you do not agree with these terms and conditions, you are not allowed to complete the installation or use the software.
This End User License Agreement (hereinafter “Agreement”) is an agreement between you (hereinafter “User”) and the Pro Gamersware GmbH (hereinafter „PGW“), a German limited liability company with its main offices located at Gaußstraße 1, 10589 Berlin, Germany. Unless explicitly otherwise agreed, these terms and conditions apply exclusively.
This Agreement regulates the provision and usage of PGW’s ENDGAME GEAR Configuration Software (hereinafter "Software") on a cost-free-basis.
If you enter into this Agreement on behalf of a company or other legal entity, you represent that you have the authority to bind that entity and its affiliates to these terms and conditions. If you do not have such authority, or if you do not agree to the terms and conditions of this Agreement, you may not install or use this Software. These terms and conditions also apply to updates and additions to the Software made by PGW, unless otherwise specified in the delivery.